Battery Charger -VAS5903- Maintenance Charging
General InformationTire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm
-VAG1331-
–
Place metal valve with rubber seal through rim from inside.
...
Battery Charger -VAS5903- Maintenance Charging
Note
If the battery is discharged by an electrical consumer
during maintenance charging, the Battery Charger -VAS5903-
automatically supplies the appropriate charge.
Maintenance charging can be performed without time ...
Repair Instructions for the Underbody and Stone Chip Protection
Note
The underbody and stone chip protection structure must be
restored back to its original layer strength and appearance
during a repair.
Water drain holes must remain free.
All threade ...