VW Polo manuals

Volkswagen Polo Owners Manual: Air recirculation mode

First read and observe the introductory information and safety warnings

General notes

There are different types of air recirculation, depending on the level of equipment:
Air recirculation mode (heating and fresh air system, air conditioning system (manual)).
Air recirculation mode (Climatronic).

The air recirculation mode prevents outside air from entering the vehicle.

If the outside temperature is very high, the air recirculation mode should be selected for a short time in order to cool the vehicle interior more quickly.

For safety reasons, the air recirculation mode will switch off if the   button is pressed or if the air distribution regulator is switched to  .

Switching air recirculation mode for the air conditioning system (manual) or the heating and fresh air system on and off

Switching on: press the button repeatedly until the indicator lamp in the button lights up.

Switching off: press the button repeatedly until the indicator lamp in the button is no longer lit up.

Switching air recirculation mode on and off for Climatronic

Switching on: press the button repeatedly until the symbol in the display field lights up.

Switching off: press the button repeatedly until the symbol in the display field is no longer lit up.

WARNING

Stale air can quickly make the driver tired and affect their concentration, which in turn can cause collisions, accidents and serious injuries.

NOTICE

In vehicles with an air conditioning system, do not smoke when the air recirculation mode is switched on. The smoke drawn into the cooling system can leave a residue on the evaporator and the dust and pollen filter (Climatronic with activated charcoal) producing a permanent, unpleasant odour.

Climatronic: when reverse gear is selected, air recirculation mode is switched on briefly to prevent exhaust fumes from entering the vehicle interior.
Vents
Fig. 128 In the dash panel: vents First read and observe the introductory information and safety warnings The vents   should be left open to ensure that the vehicle interior is sufficiently ...

At the filling station
...

Other materials:

Tire Pressure Monitoring Sensor with Valve, Removing and Installing
Removing     –  Remove the union nut -1-. –  Remove Tire Pressure Monitoring Sensor-2- from rim well. Installing ...

Midtronics Battery Tester -MCR340VKT-, Troubleshooting
Sometimes the display shows the malfunction or the messages based on the condition. The following is a list of the most frequent displayed messages together with suggested solutions.   Note Refer to the MCR3 ...

7-Pin« Trailer Socket
If more electrical consumers need to be connected than the »7-pin« socket allows, a second »7-pin« socket must be installed. Pin assignment must conform to DIN ISO 1724: 1 - Left turn signal 2 - Tail ...

© 2016-2024 Copyright www.vwpolo.net