Long-Term Underbody Protection -D 314 D38 M2-, Bright Color
Stone Chip Protection -AKR 311 KD1 05Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Changing a blown fuse
Fig. 174 A blown fuse
Fig. 175 Removing or fitting a
fuse using the plastic pliers ①
First read and observe the introductory
information and safety warnings
Preparation
Switch off the ignition, the lights and all electrical consumers.
Open the appropriate fuse box .
Detecti ...
Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...