Exterior mirrors
Driving tipsAdhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Checklist
The following steps should always be carried out in the specified
order before working in the engine compartment :
Park the vehicle on a level and stable surface.
Depress and hold the brake pedal until the
engine has stopped.
Apply the handbrake firmly Braking, stopping
and p ...
Lifting the vehicle with the jack
Fig. 168 Jacking points for the
vehicle jack (mirrored on the right-hand side of the vehicle)
Fig. 169 Vehicle jack at the rear
left-hand side of the vehicle
First read and observe the introductory
information and safety warnings
The jack may be applied only at the jacking points shown (m ...