Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Handling Pressure Vessels
Secure vessels to prevent them falling over!
Secure upright cylinders to stop them falling over and
cylinders lying flat to stop them rolling away.
Do not throw vessels!
If dropped, the vessels cou ...