Volkswagen Polo Owners Manual: Vehicle care and maintenance
- Caring for and cleaning the vehicle exterior
- Introduction
- Washing the vehicle
- Washing the vehicle with a high-pressure cleaner
- Cleaning windows and exterior mirrors
- Cleaning and changing windscreen wiper blades
- Waxing and polishing the vehicle
- Cleaning and caring for chrome and aluminium trim parts
- Cleaning and caring for the deck stripes
- Cleaning wheels
- Care of rubber seals
- De-icing door lock cylinders
- Underseal
- Cleaning the engine compartment
- Cleaning and caring for the interior
- Introduction
- Seat covers
- Checklist
- Cleaning cloth seat covers, fabric trim and Alcantara® upholstery
- Cleaning and caring for natural leather covers
- Cleaning leatherette upholstery
- Cleaning stowage compartments, drink holders and ash trays
- Cleaning and caring for the dash panel, wooden trims and plastic parts
- Cleaning seat belts
- Wheels and tyres
- Introduction
- Handling wheels and tyres
- Rims
- New wheels and tyres
- Tyre pressure
- Tread depth and wear indicators
- Tyre damage
- Spare wheel or temporary spare wheel
- Tyre lettering
- Winter tyres
- Snow chains
- Accessories, modifications, repairs and renewal of parts
- Introduction
- Running-in
- Accessories and parts
- Service fluids and consumables
- Repairs and technical modifications
- Repairs and faults in the airbag system
- Retrofitting two-way radios
- Information stored in the control units
- Using a mobile telephone in the vehicle without a connection to the external aerial
- Vehicle lifting points
- Mobile online services
- Consumer information
- Introduction
- Information stickers and plates
- Using the vehicle in other countries and continents
- Radio reception and aerials
- Volkswagen repair information
- Declaration of conformity
- Declaration of conformity for wheels and tyres
- Recycling and scrapping end-of-life vehicles
- Engine management system and exhaust purification system
Charging, replacing, disconnecting and connecting the vehicle battery
First read and observe the introductory information
and safety warningsCharging the battery
The vehicle battery should be charged by a qualified workshop, as the technology
used in factory-fitted ...
Other materials:
Running-in
First read and observe the introductory information
and safety warningsPlease follow the regulations concerning running-in new
parts.
Running in a new engine
Any new engine has to be run in during the first 1,500 kilometres. During its
first few hours of running, the internal friction in the ...
Coolant specification
First read and observe the introductory information
and safety warningsThe cooling system is filled at the factory with a mixture
of specially prepared water and at least 40% coolant additive G 13
(TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant
additive ...
Flushing Circuit Block Diagrams
Note
The arrows in the following illustrations show the direction
of refrigerant flow while flushing. During flushing, refrigerant
flows in the opposite direction than during A/C system
operation, therefore the high pressure side of A/C se ...
